শনিবার, ২৬ অক্টোবর, ২০১৩

Methods for Drilling in Oklahoma

            Oil Producing Process for Drilling in Oklahoma 

   
Horizontal Drilling: The process of horizontal drilling can increase production of natural oil from a well without this process drilling in Oklahoma would have been much harder then now and it won’t be profitable either. Many experts says that the horizontal drilling is expansive and hard to plant but the extra cost can be easily recovered by increased production of oil from the reserve and the best part is in Oklahoma, government is providing huge tax benefit more then 7% gross yield tax is implied on normal drilling wells but in case of directional drillers they have to pay only 1% of there production but this criteria is only for 4 years however this processes minimizes the ecological damage.


water flooding for Drilling in Oklahoma
Water flooding: Drilling in Oklahoma is growing and advance technology is making it more chipper along with effective. Water injection in wells is one of the greatest technical achievements which are serving drilling in Oklahoma a lot. This process is also-known as Water flooding method; it is used as a recovery process and maintains the production rate of a drilling whole for a longer period of time. Many companies are comparing  it with horizontal drilling system because no more then only 30% of the oil reserve can be drilled out in
Oklahoma, but water flooding have increased that rate and took it to over 55% and some extant further then that and it was invented accidentally in Pennsylvania at the year of 1865 but water flooding become common for drilling in Oklahoma at 1980s. Water injection refers to the method in the oil industry to increase pressure and by injecting massive amount of water into the well.


conventional Drilling process
Conventional Drilling: This type of method is not the smartest. These are used in low incoming nation and poor oil company on this system drilling rigs are the important part over there drilling rigs were semi-permanent in nature and the derricks were often built on site and left in place after the completion of the well. First of all a huge drilling rig is planted on the well and a pump sucks the oil from well. The drilling mechanisms outlined below differ mechanically in terms of the machinery used, but also in terms of the method by which drill cuttings are removed from the cutting face of the drill and returned to surface, but in case of drilling in Oklahoma this type of system cant help a company produce a lot.

According to First Liberty Energy this drilling types are the most important and well serving methods, however the conventional method may have became old and non productive but it was beginner of all new and huge productive drilling methods. Horizontal drilling is proven successful method.